ZEN MANUAL

0. CONTENIDO

Cuby Zen

Differential temperature and relative humidity sensor


Temperature probe

1. ADD YOUR ZEN

  1. Go to the Cuby app, click on the top left menu and select the “Sensors” option.





  2. Click on the + icon to add a new sensor
  3. With your phone, scan the QR code located at the back of the sensor or inside of it where the battery is.
  4. Select the Cuby you want to bind the Zen to.
  5. Once bounded to a Cuby, you will be able to configure the sensor. (Assign a name, Set notifications, Schedule alerts, or reassign to another Cuby)

2. LOCATION AND MOUNTING

  1. Straight into the AC: Place the Zen at the top of the AC and the probe (black wire) towards the bottom of the AC, at the air vent, passing under the cover.



  2. Another use: You can place Zen in a specific area where you want to have more precise control of temperature and humidity (without the probe).





It is necessary to activate the “Replace temperature lecture” option in the app.

Updated on agosto 3, 2022

Was this article helpful?